[superchoke]

seems like Sony phone cannot connect with this program

[admin]

Originally Posted by superchoke

seems like Sony phone cannot connect with this program

Hello!
Thank you for your feedback.

I am sorry that Moborobo failed to recognize your phone. I would also like to ask you to spend a little of your time to try to connect Moborobo again to establish connection. Before connection, please make sure the following things are all OK:

1. Enable USB Debugging and Unknown Sources
2. Make sure that the USB Connection Mode is correct
3. Make sure that Mobo Daemon has been installed onto your phone
4. Make sure that you the phone USB driver has been installed onto your phone

The link below will walk you through the above mentioned settings and help you establish connection http://www.moborobo.com/notabletoconnect.html


If you still have problem in connecting your device after try all the steps above, please provide the following information to us. We will try to solve your problem.

Your PC Operating System:
Your Phone Brand & Model:
Your Phone Firmware Version:

[KoulteR]

If you have a Sony Xperia Model, you will have to enable "Unknown sources" in the "Security" Register and the USB-Debugging in the "developer options".
1. "Settings" -> "Security" -> enable "Unknown sources"
2. "Settings" -> "developer options" -> enable "USB debugging"

I hope the post is helpful to you.

[Moborobo]

Originally Posted by KoulteR

If you have a Sony Xperia Model, you will have to enable "Unknown sources" in the "Security" Register and the USB-Debugging in the "developer options".
1. "Settings" -> "Security" -> enable "Unknown sources"
2. "Settings" -> "developer options" -> enable "USB debugging"

I hope the post is helpful to you.

Hi there,
Thanks for your support! It is really kind of you and it would be very helpful for other users. Thank you again!